Recent trends in Bi-based nanomaterials: challenges, fabrication, enhancement techniques, and environmental applications

• Vishal Dutta,
• Ankush Chauhan,
• Ritesh Verma,
• C. Gopalkrishnan and
• Van-Huy Nguyen

Beilstein J. Nanotechnol. 2022, 13, 1316–1336, doi:10.3762/bjnano.13.109

Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration

• Se-Kwon Kim,
• Sesha Subramanian Murugan,
• Pandurang Appana Dalavi,
• Sebanti Gupta,
• Sukumaran Anil,
• Gi Hun Seong and
• Jayachandran Venkatesan

Beilstein J. Nanotechnol. 2022, 13, 1051–1067, doi:10.3762/bjnano.13.92

• fluids [117][118]. A recent study has proven that synthetic changes made to the surface of titanium oxide (TiO2) nanotubes can influence their characteristics, substantially impacting cell contacts and antibacterial activity. As a result, antibiotic drugs combined with a surface-modified TiO2-based drug

Engineered titania nanomaterials in advanced clinical applications

• Padmavati Sahare,
• Paulina Govea Alvarez,
• Juan Manual Sanchez Yanez,
• Gabriel Luna-Bárcenas,
• Samik Chakraborty,
• Sujay Paul and
• Miriam Estevez

Beilstein J. Nanotechnol. 2022, 13, 201–218, doi:10.3762/bjnano.13.15

• vivo [112]. Photosensitizers utilized in clinical treatments are generally hydrophobic, making them difficult to be used in aqueous systems, thereby reducing their delivery and photosensitizing efficiency. Shah et al. synthesized and modified TiO2 nps for safer cancer treatment using PDT. They reported

• . coated TiO2 nps with carboxymethyl dextran (CMD), a hydrophilic polymer to form hydrophilized TiO2 nps (HTiO2 nps). In vivo mapping revealed enhanced ROS production in ultrasonically treated cells with HTiO2 nps, suppressing the growth of tumors [117]. Similarly, when avidin-modified TiO2 was used to

Comprehensive review on ultrasound-responsive theranostic nanomaterials: mechanisms, structures and medical applications

• Sepand Tehrani Fateh,
• Lida Moradi,
• Elmira Kohan,
• Michael R. Hamblin and
• Amin Shiralizadeh Dezfuli

Beilstein J. Nanotechnol. 2021, 12, 808–862, doi:10.3762/bjnano.12.64

Gram-scale synthesis of splat-shaped Ag–TiO₂ nanocomposites for enhanced antimicrobial properties

• Mohammad Jaber,
• Asim Mushtaq,
• Kebiao Zhang,
• Jindan Wu,
• Dandan Luo,
• Zihan Yi,
• M. Zubair Iqbal and
• Xiangdong Kong

Beilstein J. Nanotechnol. 2020, 11, 1119–1125, doi:10.3762/bjnano.11.96

• TiO2 NP nucleation started after adding the urea and PVP surfactant. Then, the aqueously dispersed AgNO3 solution was poured into the prepared TiO2/PVP mixture. It was assumed that the positively charged Ag+ ions interacted with the negatively charged PVP-modified TiO2 NPs due to electrostatic

Fabrication of Ag-modified hollow titania spheres via controlled silver diffusion in Ag–TiO₂ core–shell nanostructures

• Bartosz Bartosewicz,
• Malwina Liszewska,
• Bogusław Budner,
• Marta Michalska-Domańska,
• Krzysztof Kopczyński and
• Bartłomiej J. Jankiewicz

Beilstein J. Nanotechnol. 2020, 11, 141–146, doi:10.3762/bjnano.11.12

• NP-modified TiO2 HSs are based mainly on multistep processes including hard-templating methods [10][11][12][13][14][15][16][17][18][19]. Au-modified TiO2 HSs of regular shape were prepared using a multistep process in which sulfonated polystyrene spheres were used as a hard-template [10]. The

• fabricated in a multistep process including a two-step hydrothermal treatment [11]. Ag-modified TiO2 HSs showing efficient photocatalysis in the visible-light range were synthesized in a multistep process through a sacrificial core technique using AgBr as the core [12]. A hard-templating method with a silica

• carbon template was used in a one-pot synthesis of uniform TiO2–Ag hybrid HSs [16], and of Ag/AgCl modified self-doped TiO2 HSs [17]. Finally, polymer spheres were used as hard-templates in a multistep fabrication of tri-modified TiO2 HSs (Ag–C/N–TiO2) [18], and of silver/TiO2 HSs [19]. Many papers

Rapid, ultraviolet-induced, reversibly switchable wettability of superhydrophobic/superhydrophilic surfaces

• Yunlu Pan,
• Wenting Kong,
• Bharat Bhushan and
• Xuezeng Zhao

Beilstein J. Nanotechnol. 2019, 10, 866–873, doi:10.3762/bjnano.10.87

• . [22] modified TiO2 with 7-[4-(trifluoromethoxyphenylazo)phenoxy]pentanoic acid (CF3AZO) which could reversibly switch between hydrophobic (≈145°) and hydrophilic (≈24°) under UV illumination for about 13 h. Chagas et al. [23] fabricated surfaces that were reversibly wettable by dipping polypropylene

• vinyltrimethoxysilane sol–gel where the WCA changed from about 180° to 108° in under 50 min upon UV illumination and then further reduced to 20° after another 30 min. Thus the total transition time from superhydrophobic to superhydrophilic was about 80 min. Petroffe et al. [29] modified TiO2 with 11-(4-(phenylazo

Novel reversibly switchable wettability of superhydrophobic–superhydrophilic surfaces induced by charge injection and heating

• Xiangdong Ye,
• Junwen Hou and
• Dongbao Cai

Beilstein J. Nanotechnol. 2019, 10, 840–847, doi:10.3762/bjnano.10.84

• for converting superhydrophobic surfaces into superhydrophilic surfaces after only 10 min of ultraviolet irradiation. Gao et al. [6] prepared 18 alkyltrichlorosilane-modified TiO2 films for the reversible switching between superhydrophilicity and superhydrophobicity of a wood surface. Feng et al. [7

Cr(VI) remediation from aqueous environment through modified-TiO₂-mediated photocatalytic reduction

• Rashmi Acharya,
• Brundabana Naik and
• Kulamani Parida

Beilstein J. Nanotechnol. 2018, 9, 1448–1470, doi:10.3762/bjnano.9.137

• charge carriers, extension of the light absorption range and intensity, increase of the surface active sites, and higher photostability. Advantages and limitations for photoreduction of Cr(VI) over modified TiO2 are depicted in the Conclusion. The various challenges that restrict the technology from

• photocatalytic reduction of Cr(VI) along with their good recoverability and recyclability. Keywords: charge transfer; Cr(VI) reduction; heterojunction; modified TiO2; photocatalysis; spinel oxides; Review Introduction The increase in the global population demands rapid growth of industrialization and

• six sections. The optical and electrochemical characteristics of modified TiO2 photocatalysts are discussed in the first section. In the second section, we have reviewed how carbon-based advanced materials like reduced graphene oxide (RGO), carbon nanotubes (CNTs) and carbon dots (CDs) improve the

Noble metal-modified titania with visible-light activity for the decomposition of microorganisms

• Maya Endo,
• Zhishun Wei,
• Kunlei Wang,
• Baris Karabiyik,
• Kenta Yoshiiri,
• Paulina Rokicka,
• Bunsho Ohtani,
• Agata Markowska-Szczupak and
• Ewa Kowalska

Beilstein J. Nanotechnol. 2018, 9, 829–841, doi:10.3762/bjnano.9.77

• silver- and gold-modified TiO2 2 wt % of silver and gold were deposited on six commercial titania samples: ST01 (Ishihara, ST-01), ST41 (Ishihara, ST-41), TIO12 (TAYCA, JRC-TIO-12), FP6 (Showa Denko Ceramics, FP-6), TIO6 (Catalysis Society of Japan, JRC-TIO-6) and STF10 (Showa Denko Ceramics, ST-F10). In

• (500 rpm). The obtained noble metal-modified TiO2 samples were centrifuged, washed twice with methanol and twice with Milli-Q water and dried at 378 K. Antibacterial activity test 50 mg of the sample was dispersed in 7.0 mL of E. coli K12 (ATCC29425) suspension at a concentration of ca. 0.180 Abs at

Fabrication and photoactivity of ionic liquid–TiO₂ structures for efficient visible-light-induced photocatalytic decomposition of organic pollutants in aqueous phase

• Anna Gołąbiewska,
• Marta Paszkiewicz-Gawron,
• Aleksandra Sadzińska,
• Wojciech Lisowski,
• Ewelina Grabowska,
• Adriana Zaleska-Medynska and
• Justyna Łuczak

Beilstein J. Nanotechnol. 2018, 9, 580–590, doi:10.3762/bjnano.9.54

• size of the IL–TiO2 photocatalysts. The values in parenthesis represent the error in measurement. Elemental composition (in atom %) and chemical characteristics of titanium, oxygen, carbon and nitrogen states in the surface layer of [ODMM][Cl] and [TDMM][Cl] IL-modified TiO2 particles, evaluated by X

Influence of the preparation method on the photocatalytic activity of Nd-modified TiO₂

• Patrycja Parnicka,
• Paweł Mazierski,
• Tomasz Grzyb,
• Wojciech Lisowski,
• Ewa Kowalska,
• Bunsho Ohtani,
• Adriana Zaleska-Medynska and
• Joanna Nadolna

Beilstein J. Nanotechnol. 2018, 9, 447–459, doi:10.3762/bjnano.9.43

• Poznan, 60-780 Poznan, Poland Institute of Physical Chemistry, Polish Academy of Sciences,01-224 Warsaw, Poland Institute for Catalysis, Hokkaido University, Sapporo 001-0021, Japan 10.3762/bjnano.9.43 Abstract Nd-modified TiO2 photocatalysts have been obtained via hydrothermal (HT) and sol–hydrothermal

• synthesized samples was evaluated by the degradation of phenol in aqueous solution under irradiation with UV–vis (λ > 350 nm) and vis (λ > 420 nm) light, as well as by the degradation of gaseous toluene under irradiation with vis (λmax = 415 nm) light. It was found that Nd-modified TiO2 is an efficient

• light-induced degradation of the model pollutant in aqueous solution. Keywords: heterogeneous photocatalysis; hydrothermal method; modified TiO2; neodymium; sol–hydrothermal method; Introduction Heterogeneous photocatalysis based on titanium dioxide (TiO2) has become the focus of numerous studies due

Evaluating the toxicity of TiO₂-based nanoparticles to Chinese hamster ovary cells and Escherichia coli: a complementary experimental and computational approach

• Alicja Mikolajczyk,
• Natalia Sizochenko,
• Ewa Mulkiewicz,
• Anna Malankowska,
• Michal Nischk,
• Przemyslaw Jurczak,
• Seishiro Hirano,
• Grzegorz Nowaczyk,
• Adriana Zaleska-Medynska,
• Jerzy Leszczynski,
• Agnieszka Gajewicz and
• Tomasz Puzyn

Beilstein J. Nanotechnol. 2017, 8, 2171–2180, doi:10.3762/bjnano.8.216

• hazardous for living organisms. Considering the ever-growing number of new types of nanoparticles that can potentially contaminate the environment, a determination of their toxicity is extremely important. The main aim of presented study was to investigate the cytotoxic effect of surface modified TiO2-based

• nanoparticles, to model their quantitative nanostructure–toxicity relationships and to reveal the toxicity mechanism. In this context, toxicity tests for surface-modified TiO2-based nanoparticles were performed in vitro, using Gram-negative bacteria Escherichia coli and Chinese hamster ovary (CHO-K1) cells. The

• ), platinum (Pt), or palladium (Pd) [13][14], (e) the use of dye-modified TiO2 [15][16], or (f) coupling TiO2 with other semiconductors [17][18]. In the current work, we will focus on surface modification methods. Metal-ion doped TiO2 (so-called second generation nanomaterials) may cause adverse effects not

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

• photocatalyst. The general mechanism for this reaction has been illustrated in Figure 7b. A similar binary nanocomposite has been reported by Xiang et al., which consists of graphene-modified TiO2 nanosheets [124]. This composite shows excellent H2 production rate of 736 µmol h−1 with 1 wt % of graphene content

In situ scanning tunneling microscopy study of Ca-modified rutile TiO₂(110) in bulk water

• Giulia Serrano,
• Beatrice Bonanni,
• Tomasz Kosmala,
• Marco Di Giovannantonio,
• Ulrike Diebold,
• Klaus Wandelt and
• Claudio Goletti

Beilstein J. Nanotechnol. 2015, 6, 438–443, doi:10.3762/bjnano.6.44

• Abstract Despite the rising technological interest in the use of calcium-modified TiO2 surfaces in biomedical implants, the Ca/TiO2 interface has not been studied in an aqueous environment. This investigation is the first report on the use of in situ scanning tunneling microscopy (STM) to study calcium

• impurity on the TiO2 bulk. In situ STM images of the surface in bulk water exhibit one-dimensional rows of segregated calcium regularly aligned with the [001] crystal direction. The in situ-characterized morphology and structure of this Ca-modified TiO2 surface are discussed and compared with UHV-STM

• , BO and IO, possibly involving both the Ti and O atoms of the surface layers, and producing a certain degree of local structural deformation [6]. Conclusion The Ca-modified TiO2(110) rutile surface was investigated in UHV conditions after preparation using sputtering and annealing cycles to produce